Page 23 - i-Pilot Link Owner's Manual

GETTING STARTED

2 c. Press and hold the Ok button on your remote. The 2d 2e
display screen will turn on. A message about i-Pilot
Link operation will appear on the display screen.
Read the disclaimer before you continue.

d. A "I Agree" button will be present at the bottom of
the Content Area. After reading the disclaimer, select
the "I Agree" button" using your finger or by scrolling
to it with the Screen Navigation button and
pressing the Ok button to select it.

NOTICE: The i-Pilot Link remote can be
controlled using the remote buttons, by utilizing
the touch screen, or a combination of both.
Instruction on how to navigate the remote for
the first step in the instructions in each section
of the manual will include how to use both ways
to control the remote. Subsequent steps in each
sections of instructions will only detail how to
utilize the touch screen. NOTICE: The Home Screen Buttons and appearance
of the Content Area will vary slightly in appearance
e. The display screen will then show the Home Screen based on motor model and factory default selections.
Buttons in the Content Area. Home Screen Buttons can be customized. Please see
"To Edit the Home Screen Button Menu" in the "Remote
f. You are now able to use all manual functions in the Controls" section of this manual.
remote including Speed Up , Speed Down ,
Steer Left , Steer Right , and Prop On/Off .
g. After i-Pilot Link has obtained a minimum GPS
signal strength of one bar, all remaining functions
will become available.

©2019 Johnson Outdoors Marine Electronics, Inc. minnkotamotors.com | 23