Page 24 - i-Pilot Link Owner's Manual

GETTING STARTED

Charging the Remote Battery

The remote can be recharged while the remote is on or off. Follow these simple steps each time you need to charge your i-Pilot
Link remote.

1 a. Locate the Dust Cap at the base of the remote. 1a

b. Open the Dust Cap Cover in order to plug in the i-Pilot Link Remote
charging cable.

NOTICE: The remote will not charge if it
becomes too hot. The Remote protects itself if
it detects extreme heat and will not charge. Dust Cap
To continue charging the Remote, allow it to
cool down.

1b

i-Pilot Link Remote
Dust Cap

2 c. Plug the USB Remote Charger into the remote. The

Charging Indicator Light will illuminate whenever an
energized charging cable is connected.

i-Pilot Link Remote

Charging
Indicator
Dust Cap Light
NOTICE: Minn Kota recommends only charging
the i-Pilot Link remote with the charger provided USB Remote Charger Cable
by Minn Kota. The Minn Kota charger is 5 volts
DC, 2.1 amps.
NOTICE: The USB end of the charging cable is
not intended for prolonged exposure to saltwater
environments.

24 | minnkotamotors.com ©2019 Johnson Outdoors Marine Electronics, Inc.