Page 68 - Dante Controller User Guide

Dante Controller User Guide

typically because of a mismatch in parameters (e.g. sample rate incompatibility etc.), or because a device
cannot route audio to itself.

For devices with many channels, you can click the Channel Groups button to group available
channels into sets of 16.

AES67 Flows

‘Devices’ with multicast IP address names (e.g. 239.69.82.194) are actually AES67 flows, which can only
be received (or transmitted) by AES67-enabled devices.

Note: If they are displayed in blue, the currently-selected device is AES67-enabled, and can receive
AES67 flows. If they are displayed in grey, the currently-selected device is not AES67-enabled.

Creating Subscriptions
Subscriptions are created by selecting a channel from the Available Channels list in the right-hand pane of
the Receive Tab, then dragging and dropping it onto the appropriate receive channel in the left-hand pane of
the Receive Tab.
Multiple channels can be selected and then dragged and dropped onto the Receive Channels pane, to
make several subscriptions simultaneously. You can also drag and drop channel groups to make bulk
subscriptions.
Changing Receive Channel Labels

To change a receive channel label, click the label and type in the new value.

Transmit Tab

The Transmit tab is used to inspect and modify the transmit configuration of a device.

Copyright © 2020 Audinate Pty Ltd. All rights reserved. -68-