Page 165 - Modernfold Architectural Products

Acousti-Seal ENCORE Automated Technical Data
®
®
10 22 26 (10650) Operable Partitions

ACOUSTI-SEAL ENCORE AUTOMATED SERIES TECHNICAL DATA
®
®
PART 3 – EXECUTION 3.3 ADJUSTING
A. Adjust operable partitions to operate smoothly,
3.1 INSTALLATION easily, and quietly, free from binding, warp,
A. General: Comply with ASTM E557, operable excessive deflection, distortion, nonalignment,
partition manufacturer’s written installation misplacement, disruption, or malfunction,
instructions, Drawings and approved Shop throughout entire operational range. Lubricate
Drawings. hardware and other moving parts.
B. Install operable partitions and accessories after
other finishing operations, including painting have 3.4 EXAMINATION
been completed. A. Examine flooring, structural support, and opening,
C. Match operable partitions by installing panels with Installer present, for compliance with
from marked packages in numbered sequence requirements for installation tolerances and other
indicated on Shop Drawings. conditions affecting performance of operable
D. Broken, cracked, chipped, deformed or partitions. Proceed with installation only after
unmatched panels are not acceptable. unsatisfactory conditions have been corrected.

3.2 CLEANING AND PROTECTION 3.5 DEMONSTRATION
A. Clean partition surfaces upon completing A. Demonstrate proper operation and maintenance
installation of operable partitions to remove procedures to Owner’s representative.
dust, dirt, adhesives, and other foreign materials B. Provide Operation and Maintenance Manual to
according to manufacturer’s written instructions. Owner’s representative.
B. Provide final protection and maintain conditions
in a manner acceptable to the manufacturer and
Installer that insure operable partitions are without
damage or deterioration at time of Substantial
Completion.

Welded Steel Skin Max Height
Acousti-Seal without Pass Door with Pass Door
®
Encore Automated 52 STC 54 STC 56 STC 52 STC 54 STC 56 STC
®
20’-4”
19’-4”
16’-4”
24’-4”
13’-4”
17’-4”
#14 Bracket Mounted Track (7417 mm) (6198 mm) (4978 mm) (5893 mm) (5283 mm) (4064 mm)
12’-4”
12’-4”
12’-4”
12’-4”
12’-4”
12’-4”
#30 Bracket Mounted Track (3759 mm) (3759 mm) (3759 mm) (3759 mm) (3759 mm) (3759 mm)

4 Please contact your local Modernfold distributor for further assistance, or visit our website at www.modernfold.com.