Page 125 - QR KLINDEX EXPANDER850AT-RXt

STARTING AND STOPPING

ON W – select the direction of rotation of the planetary;
-- to the left, rotation starts in an anti-clockwise di-
W RX rection
-- middle, motor off
TX -- to the right, rotation starts in a clockwise direction

ON W SPEED STOP

W RX

TX

LEFT RIGHT

– the radio control is now fully operational. PLANETARY

If the yellow alarm/battery LED flashes, replace and l NOTICE
recharge the battery as described in the section "Re- If the lever of the switch for the direction
placing the radio control battery" on page 16. of rotation remains in the "STOP" posi-
– Use the joystick to raise/lower the planetary so that tion, the appliance will not move.
– move the appliance with the directional joystick.
the tools touch and adhere correctly to the floor.
Check that the level between the appliance wheels l NOTICE
and the tools is correct Do not use the swing in manual mode.
– select the most appropriate appliance speed based Make sure that the "OFFSET" knob is set
on the type of operation to be carried out; to "0" and the "SWING" knob has been
-- lever up, max. speed turned fully to the left.
-- lever in the intermediate position, medium speed
-- lever down, minimum speed Automatic mode
(see the section "Rotation speed and direction" on – Set the switch to "AUTO"
page 31)
MAN AUTO
UP

DOWN

Manual mode
– Set the switch to "MAN"

MAN AUTO

– turn the knob to select the most appropriate rota- – turn the knob to select the most appropriate rota-
tion speed of the planetary based on the type of op- tion speed of the planetary based on the type of op-
eration to be carried out (see the section "Rotation eration to be carried out (see the section "Rotation
speed and direction" on page 31) speed and direction" on page 31)

– select the direction of rotation of the planetary;
-- to the left, rotation starts in an anti-clockwise di-
rection
-- middle, motor off
-- to the right, rotation starts in a clockwise direction

www.klindex.com - Made in Italy 35