Page 9 - Chemical Tire Applicator™ / Wheel Brite Applicator™

CHEMICAL TIRE APPLICATOR™
WHEEL BRITE APPLICATOR™

Introduction

Before You Get Started

Tools needed for installation:

miscellaneous hand tools safety glasses
work gloves hammer drill with 1/2” bit

Supplies Needed for Installation:

1/2” polyflow tube 3/8” polyflow tube

3/8” anchors or lag bolts
(depending on wall structure)

Equipment included: Qty

Driver side stand assembly 1
Passenger side treadle assembly 1
Tank & frame assembly with split cover 1

Pump/air panel assembly 1
3/8” polyflow tube (red) 30’
Accessory box 1
Accessory box: Qty

Lag bolts 3
Cable straps 20
Tire gauge 1

Note: Uncrate and inspect shipment for damage, and to verify that all pieces are there. If there
is any damaged equipment, file a claim with the trucking company immediately. Receiving
party is responsible for filing claim with trucking company. Notify your local distributor
or Belanger, Inc. immediately If shipment is determined damaged or incomplete.

®
Belanger, Inc. 1995
This manual and the accompanying equipment are protected by United States and International copyright and patent laws.
You may make one copy of this manual. Do not make additional copies of this manual or electronically transmit it in any form
whatsoever, in whole or in part, without the prior written permission of Belanger, Inc.
®

1MANUL088 Belanger , Inc. * 1001 Doheny Ct. * Northville, MI 48167 * Ph (248) 349-7010 * Fax (248) 380-9681 7