Page 24 - DRAGO GT Operators Manual

Section 3 – Attaching/Detaching Corn Head

3.2 – Detaching

Danger: During the detaching process,
NO PERSON should be near the combine
and the corn head during this process.

1) Find a suitable flat hard surface away from
other equipment.
2) Raise the feeder house completely and engage
the safety stand (A) on feeder house lift
cylinder (B).
3) Disconnect and place the PTO shafts (C) from
the feeder house input shaft (D).
4) Place the PTO shafts on the storage supports.
5) Disconnect and store all electrical and
hydraulic couplings.
6) Disconnect the combine attachment
mechanism to release the corn head from the
combine.
7) Disengage the safety stand (A) on feeder
house lift cylinder (B).
8) Lower the feeder house until the corn head
touches the ground and the feeder house
adapter clears the top beam of the corn head.
9) Back the combine away from the corn head
until clear and raise feeder house.

Important: If loading the corn head onto a
transport trailer, ensure that the support
pads on the trailer are in the correct
locations. See section 4.2 for more details.

Page | 22