Page 25 - DRAGO GT Operators Manual

Section 3 – Attaching/Detaching Corn Head

3.3 – Additional Corn Head Connections

Auxiliary Hydraulics

Some Drago GT corn heads require additional combine
hydraulics (A) to operate optional functions. These
functions include folding heads, long down corn augers
and short down corn augers.

Warning Lights

All Drago GT corn heads come equipped with warning
lights as standard equipment. If no header height
control systems are installed on the corn head a three
pin electrical connector (B) must be wired into the
supplied wires (C) on the corn head. A mating plug
must be also be wired into the combine wire harness
to complete the circuit. Refer to the Combine
Operators Manual. The plug on the corn head should
be wired as shown.

Cavity A = Left Light Power (Blue Wire)
Cavity B = Common Ground (Two Brown Wires)
Cavity C = Right Light Power (Blue Wire)

Header Height Electrical

Drago GT corn heads can be equipped with a
Headsight header height control system. Depending on
which Headsight system is installed it may have from
one to three electrical connections (D) that need to be
made in order to connect the corn head to the
combine.

Page | 23