Page 50 - DRAGO GT Operators Manual
P. 50
Section 6 – Adjustments
6.6.3 – Deck Plate Tension
The return pressure of the deck plates can be adjusted
on each individual deck plate.
1) Factory Setting: Adjustment bolts (I) should
be centered between the two laser-etched
lines.
2) To adjust loosen the two flange bolts (H) and
turn the adjustment bolts (I).
3) The two laser-etched lines (J & K) correspond
to a minimum and maximum spring tensions.
a. Outer Line (J) = Minimum spring
tension.
b. Inner Line (K) = Maximum spring
tension.
Left Side
Right Side
Page | 48
