Page 54 - DRAGO GT Operators Manual
P. 54
Section 6 – Adjustments
6.7.3 – Gathering Chain Timing
Under normal conditions the gathering chain should be
timed in a staggered pattern (F). For severely down
corn it may be necessary to retime the chains. They
should be retimed where one lug is running
immediately behind the opposing lug (G). Never run
the gathering chains with the lugs in line with one
another, or damage may occur.
Factory Setting (Recommended)
Down Corn
Gathering Chain Re-Timing
1) Remove the two M12 x 25 flange bolts (H)
securing tool ST-8 (I) to the corn head
mainframe.
Page | 52
