Page 53 - DRAGO GT Operators Manual

Section 6 – Adjustments

Gathering Chain Replacement:

1) Loosen jamb nut (B).
2) Loosen the tensioner bolt (C) until it stops.

Note: The tensioner bolt (C) cannot be removed
from the tensioner tube.

3) Place a clamp (D) on the gathering chain
tensioner (E) to compress the tensioner
assembly.
4) Remove the four bolts (F) from the gathering
chain guide and loosen the rear poly frame
pivot bolt (G).
5) Remove the gathering chain guide assembly
(H) from the row unit.
6) Replace the gathering chain (I).
7) Ensure the new gathering chain is timed
correctly to the corresponding chain. See
Section 6.7.3.
8) Reinstall the gathering chain guide assembly
(H). The gathering chain guide should be
installed in the outermost position of the slots.
See Section 6.7.4.
9) Tension the gathering chain. See Section
6.7.1.

Page | 51