Page 57 - DRAGO GT Operators Manual
P. 57
Section 6 – Adjustments
6.7.4 – Gathering Chain Guide Position
The gathering chain guides on the Drago GT corn head
can be move side to side to help provide more
aggressive feeding of material in down corn conditions.
The gathering chain guides should only be moved if
tough feeding conditions are encountered. They should
be moved back to the factory settings when not
operating in down corn.
1) Loosen, but do not remove, the four bolts
(O) securing the gathering chain guide.
2) Move the gathering chain guide (P) to the
desired position.
a. Factory Setting = Chain guide
toward the outside of the row unit.
b. Down Corn = Chain guide toward
the center of the row unit.
3) Tighten the four bolts (O).
Factory Setting (Recommended)
Down Corn
Page | 55
