Page 52 - Induction & WorkBook
P. 52

USE OF POWER TOOLS


                                                SUMMARY OF CONTROL MEASURES:-



                                                ●     Use correct tools for the task;

                                                ●     The tools must be used in accordance with the

                                                      manufacturers instructions;

                                                ●     Use 110-volt equipment where the equipment

                                                      is used on  construction sites or environments
                                                      where there is a risk of injury;


                                                ●     Use the correct P.P.E. for the task;


                                                ●     Keep work equipment well maintained;

                                                ●     Use anti-vibration handles where provided;


                                                ●     Prevent access to hazardous work area;


                                                ●     Do not overload power sockets;

                                                ●     Use material supports as required;


                                                ●     Use material clamps to keep hands away from
                                                      hazardous parts of tool;


                                                ●     Ensure guards are positioned and adjusted as

                                                      detailed by the manufacturer;

                                                ●     All electrical equipment must be PAT tested by

                                                      a competent person;


                                                ●     Complete inspection BEFORE use, report
                                                      defects to your supervisor. DO NOT USE
                                                      DEFECTIVE POWER TOOLS;


                                                ●     Check vibration exposure action and exposure

                                                      limit values. See HSE ref. Indg 175 and L140.











                                                            46
   47   48   49   50   51   52   53   54   55   56   57