Page 103 - Catalogue - cuvettes and solid-state calibration standards

Photometric validation of UV/VIS spectrophotometers

Potassium dichromate linearity and photometric accuracy kit in conformity with many global pharmacopoeia
requirements.

Part Number Description Price
FF-SRM-PD-20MG-L Liquid Potassium Dichromate, 20mg/L - photometric standard for validating UV/VIS 810.53
FF-SRM-PD-40MG-L spectrophotometers 810.53
FF-SRM-PD-60MG-L Liquid Potassium Dichromate, 40mg/L - photometric standard for validating UV/VIS 810.53
FF-SRM-PD-80MG-L spectrophotometers 810.53
FF-SRM-PD-100MG-L Liquid Potassium Dichromate, 60mg/L - photometric standard for validating UV/VIS 810.53
FF-SRM-PD-120MG-L spectrophotometers 810.53
FF-SRM-PD-140MG-L Liquid Potassium Dichromate, 80mg/L - photometric standard for validating UV/VIS 810.53
FF-SRM-PD-160MG-L spectrophotometers 810.53
FF-SRM-PD-180MG-L Liquid Potassium Dichromate, 100mg/L - photometric standard for validating UV/VIS 810.53
FF-SRM-PD-200MG-L spectrophotometers 810.53
FF-SRM-PD-600MG-L Liquid Potassium Dichromate, 120mg/L - photometric standard for validating UV/VIS 810.53
FF-HCLO4-BLANK spectrophotometers 810.53
FF-SRM-PD5 Liquid Potassium Dichromate, 140mg/L - photometric standard for validating UV/VIS 2,314.74
FF-SRM-PD6 spectrophotometers 2,630.53
Liquid Potassium Dichromate, 160mg/L - photometric standard for validating UV/VIS
spectrophotometers
Liquid Potassium Dichromate, 180mg/L - photometric standard for validating UV/VIS
spectrophotometers
Liquid Potassium Dichromate, 200mg/L - photometric standard for validating UV/VIS
spectrophotometers
Liquid Potassium Dichromate, 600mg/L - photometric standard for validating UV/VIS
spectrophotometers
Perchloric Acid blank - needed when working with our liquid Potassium Dichromate standards
Potassium Dichromate linearity kit - concentrations 20, 40, 60, 80 and 100mg/L plus Perchloric Acid
blank
Potassium Dichromate linearity kit - concentrations 20, 40, 60, 80, 100 and 600mg/L plus Perchloric
Acid blank

Liquid Potassium Dichromate standards are primarily used by laboratories needing to conform either to the European
Pharmacopoeia (EP) or to cGMP regulations. Our portfolio of these standards ranges from individual standards that need to
be supplemented by the FF-HCL04-Blank through to kits that already include this item.

In many cases, validation has to be carried out every three months or after a repair. Should this repeat calibration NOT be
necessary in your lab, we recommend using our solid state FF-FUV series solid state standards that never need recalibration
due to material aging - with just one filter you can check the photometric accuracy and stray light performance at any point in
the 200-700nm range.

Capabilities:

 Verification of photometric accuracy and linearity in the UV range at the following wavelengths: 235, 257,
313, 350nm

95

All prices are shown in Euro and are subject to VAT where applicable.