Page 1193 - Workshop Manual - Aumark (BJ1051)

53-17
Battery-Battery
7. Assemble the battery
(a). Place the battery as the indication of left
figure.
Notes:
The 24V power system is formed by two 12v
battery in series, so pay attention to the direction
during placement for fear that the electric device
is damaged by wrong wire connection.

8. Assemble the battery pressure plate
and tie rod

9. Assemble the battery connection wire
of pole
(a). Assemble battery connection wire of
pole according to the sequence indicated
in the figure.
Notes:
• Installation principle is to assemble
positive connection wire and then
assemble negative connection wire.
• The connection wire must be firm; take
proper measures and treat it if there is 53
corrosion, rust or other bad connection
on the joint position of negative
connection wire and frame. Make sure
the return circuit of electric device free.

10. Assemble the battery protective cover

Page 1193