Page 456 - Workshop Manual - Aumark (BJ1051)

04-312
Diagnosis-power windows
2. Checking control circuit from left front door control switch to right front door electric
glass switch

(a) Disconnect connector of right front door
electric glass switch.

04 (b) Use a multimeter to measure resistances
between connector pins 2 and 4 of left
front door control switch E003 and
connector pins 4 and 2 of right front door
electric glass switch D003 respectively.
Resistance: ≤2Ω

Are check results normal?
Yes > Go to step 3.
No > Repair line open between connector pins 2 and 4 of left front door control switch E003 and
connector pins 4 and 2 of right front door electric glass switch D003.
3. Checking right front door electric glass switch

(a) Measure resistances according to the values listed in the following table.
Use a multimeter
to connect Switch status Resistance
terminals

1 - 2 Right front window lift ≤ 2 Ω

3 -5 Right front window lift ≤ 2 Ω
2 -3 Right front window still (i.e. switch in natural position) ≤ 2 Ω

1 - 4 Right front window still (i.e. switch in natural position) ≤ 2 Ω

Page 456