Page 97 - Workshop Manual - Aumark (BJ1051)

03-23
Maintenance Specifications-Rear Axle

Main reducing gear
Number of teeth of driving gear 9

Number of teeth of driven gear 39

Final drive ratio 4.33
Deflection limit of driven gear 0.07 mm
Tooth flank clearance between Standard value 0.18~0.23 mm
driving and driven gears

Differential assembly

End gap of side gear 0~0.18 mm
Rotation starting torque of driven 0.686~1.586 N
gear
Tooth flank clearance between
planetary gear and side gear Standard value 0~0.09 mm
Limit value 0.18 mm 03
Radial clearance between cross and
planetary gear Standard value 0~0.04 mm
Limit value 0.09 mm
Radial clearance between side gear
and differential carrier Standard value 0~0.08 mm
Limit value 0.16 mm
Clearance between side gear and
half axle spline Standard value 0~0.55 mm
Limit value 1.11 mm

Thickness of thrust washer of 1.42~1.50 mm
planetary gear
Thickness of thrust washer of side 1.92~2.00 mm
gear
Driving gear assembly
Distance from flange plane to 321 mm
medium line of axle housing
Rotation starting force 9.8~19.6 N
Specification of adjusting washer 0.05, 0.10, 0.20, 0.40, 0.50 mm
of driving gear bearing
Specification of adjusting washer 0.10, 0.15, 0.40 mm
of driving gear bearing seat

Page 97