Page 22 - 27766-LASTPAGES

Compliant Cables and Accessories Guidance and Manufacturer's Declaration – Electromagnetic Immunity

The Product is intended for use in the electromagnetic environment specified below.
The customer or the user of the Product should assure that it is used in such an
Warning environment.
Use of non-original cables or accessories may result in increased
emissions or decreased immunity performance of the Product. IEC Compliance Electromagnetic environment -
Immunity test 60601-1-2 level guidance
The table below lists cables and accessories for which the Test level
manufacturer claims EMC compliance: Field strengths from fixed RF
transmitters, as determined by an
a
electromagnetic site survey ,
should be less than the
Description Details compliance level in each
b
Measurement Cable Original only frequency range .
Interference may occur in the
Accessories:
vicinity of equipment marked with
Lip Clip Original only the following symbol:
Connection Hook Original only
Original Switching charger only: 
Charger Input: 100-240 V AC ~ 50-60 Hz Note
Output: 6V DC ± 5%, 1000 mA At 80 MHz and 800 MHz, the higher frequency range
applies.
Note
These guidelines may not apply in all situations.
Electromagnetic propagation is affected by absorption and
reflection from structures objects and people.
a
Field strengths from fixed transmitters, such as base stations for radio (cellular/
cordless) telephones and land mobile radios, amateur radio, AM and FM radio
broadcast and TV broadcast cannot be predicted theoretically with accuracy. To
assess the electromagnetic environment due to fixed RF transmitters, an
electromagnetic site survey should be considered. If the measured field strength in the
location in which the Product is used exceeds the applicable RF compliance level
above, the Product should be observed to verify normal operation. If abnormal
performance is observed, additional measures may be necessary, such as re-orienting
or relocating the Product.

b
Over the frequency range 150 kHz to 80 MHz, field strengths should be less than
3 V/m.

214/222 BMLPXEUDFUPRT / Rev.13 / 10-2018 BMLPXEUDFUPRT / Rev.13 / 10-2018 219/222

#27766-EYAL - 277766-EYAL | 7 - B | 19-01-08 | 13:40:47 | SR:-- | Black 27766-EYAL - 277766-EYAL | 7 - B | 19-01-08 | 13:40:47 | SR:-- | Yellow 27766-EYAL - 277766-EYAL | 7 - B | 19-01-08 | 13:40:47 | SR:-- | Magenta 27766-EYAL - 277766-EYAL | 7 - B | 19-01-08 | 13:40:47 | SR:-- | Cyan #