Page 46 - 26306

48 37

• Cables CHECK will start automatically and the 7.6.4 DEMO Mode RAYPEX 6 Overview 7.4 Operation
®
results – either OK (Fig. 34) or ERROR (Fig. 35) -
will be shown on the screen. The DEMO mode allows you to get acquainted with
en the device and to demonstrate its operation to your Important Advice for successful en
patients. determination
To activate the DEMO mode, follow the next steps: Front view • Always use a rubber dam to isolate the
• Disconnect the measuring cable or charger (if working area
connected) from the device. Touch screen • Always wear gloves during the
measuring procedure.
On/Off
• Prior to measurement the access cavity
Measurement must be dried with a cotton pellet in order
NOTE cable/charger to prevent incorrect measurement.
The DEMO mode will not start if the cable receptacle • Select the size of the measuring file
measuring cable is connected. matching the root canal diameter.

Fig. 34 Accessories are OK 7.4.1 Connecting the Device
Fig. 4 RAYPEX 6 front view
®
• Press the On/Off button to switch the device on.
WARNING After welcome melody and welcome screen, the
ERROR message indicates that the main screen is displayed.
accessories are not functioning properly • In the framed window “plug-and-start” symbols
(cable breakage) or the contact area is are shown to indicate how to connect the device
dirty. • Enter the Settings Menu and select the DEMO Rear view properly.
feature (Fig. 36).
indicates that the measurement cable is
disconnected (Fig. 6).
Speaker

Battery compartment
Fig. 35 Accessories ERROR message
Fig. 5 RAYPEX 6 rear view
®
For assistance call your local distributor
or VDW GmbH directly. Fig. 36 Select DEMO

Fig. 6 Measurement cable is disconnected
• During the DEMO sequence “DEMO” is written
• To exit the CHECK mode, tap the back arrow on the screen, indicating a measuring simulation. • Make sure that the measurement cable is not
icon. • Tap the screen to pause/resume the demo connected to the patient.
• Disconnect the measuring cable from the device. simulation. • Plug the measurement cable into the receptacle
on the right side of RAYPEX 6.
®
The connector symbol will turn from red to grey
and the two electrode symbols turn yellow.

Endo Easy Efficient ® 26306-EYAL - 26306-EYAL | 2 - B | 18-08-14 | 12:05:15 | SR:-- | Yellow 26306-EYAL - 26306-EYAL | 2 - B | 18-08-14 | 12:05:15 | SR:-- | Magenta 26306-EYAL - 26306-EYAL | 2 -

#

#26306-EYAL - 26306-EYAL | 2 - B | 18-08-14 | 12:05:15 | SR:-- | Black
26306-EYAL - 26306-EYAL | 2 - B | 18-08-14 | 12:05:15 | SR:-- | Magenta
26306-EYAL - 26306-EYAL | 2 - B | 18-08-14 | 12:05:15 | SR:-- | Yellow
#
26306-EYAL - 26306-EYAL | 2 - B | 18-08-14 | 12:05:15 | SR:-- | Cyan