Page 182 - fif

25567_eyal-Y-MK1-837 - 25567_pnim_y-mk1-837_eyal.1.1 | 7 - A | 18-06-11 | 09:03:44 | SR:-- | Cyan
#25567_eyal-Y-MK1-837 - 25567_pnim_y-mk1-837_eyal.1.1 | 7 - A | 18-06-11 | 09:03:44 | SR:-- | Black
25567_eyal-Y-MK1-837 - 25567_pnim_y-mk1-837_eyal.1.1 | 7 - A | 18-06-11 | 09:03:44 | SR:-- | Yellow
25567_eyal-Y-MK1-837 - 25567_pnim_y-mk1-837_eyal.1.1 | 7 - A | 18-06-11 | 09:03:44 | SR:-- | Magenta
#
Identificazione dei simboli
NOTE 1: At 80 MHz and 800 MHz, the higher frequency range applies. 13 IDENTIFICAZIONE DEI SIMBOLI

NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation L'etichetta del dispositivo reca i seguenti simboli standard:
is affected by absorption and reflection from structures, objects and people.
a Simbolo Identificazione
Field strengths from fixed transmitters, such as base stations for radio (cellular/
cordless) telephones and land mobile radios, amateur radio, AM and FM radio SN Numero di serie
broadcast and TV broadcast cannot be predicted theoretically with accuracy. To
assess the electromagnetic environment due to fixed RF transmitters, an
electromagnetic site survey should be considered. If the measured field strength in the Numero di catalogo
®
location in which the ProPex II is used exceeds the applicable RF compliance level
®
above, the ProPex II should be observed to verity normal operation. If abnormal
performance is observed, additional measures may be necessary, such as reorienting Numero di lotto
®
or relocating the ProPex II.
Corrente diretta (connessione per alimentazione elettrica)
b
Over the frequency range 150 kHz to 80 MHz, field strengths should be less than
3 V/m. Produttore

Data di produzione
Specifications for enclosure port immunity to RF wireless communications equipment
®
The ProPex II is intended for use in an electromagnetic environment in which Apparecchiatura di Classe II
®
radiated RF disturbances are controlled. The customer or the user of the ProPex II
can help prevent electromagnetic interference by maintaining radiation levels of RF
wireless communications equipment (emitters) within the compliance limits specified Parte applicata tipo BF
below.
Recommended radiation levels of RF wireless Communications Equipment
Istruzioni per l'uso in formato elettronico
Minimum
EC 60601-1-2
Frequency band Compliance level separation
Test level
distance Consultare il manuale/libretto di istruzioni
380 - 390 MHz 27 V/m 27 V/m 0.3 m
Riciclaggio: NON BUTTARE VIA! Questo prodotto e tutti i suoi
430 - 470 MHz 28 V/m 28 V/m 0.3 m componenti devono assolutamente essere riciclati tramite il nostro
704 - 787 MHz 9 V/m 9 V/m 0.3 m distributore
800 - 960 MHz 28 V/m 28 V/m 0.3 m
Limite di temperatura
1 700 - 1 990 MHz 28 V/m 28 V/m 0.3 m
2 400 - 2 570 MHz 28 V/m 28 V/m 0.3 m
5 100 - 5 800 MHz 9 V/m 9 V/m 0.3 m

182/184 B EU PIIS DFU PRT / Rev.04 / 02-2018 (Old ZF 1902127.X) B EU PIIS DFU PRT / Rev.04 / 02-2018 (Old ZF 1902127.X) 167/184