Page 31 - fif
P. 31

#25567_eyal-Y-MK1-837 - 25567_pnim_y-mk1-837_eyal.1.1 | 1 - A | 18-06-11 | 09:03:43 | SR:-- | Black
                                                                                       25567_eyal-Y-MK1-837 - 25567_pnim_y-mk1-837_eyal.1.1 | 1 - A | 18-06-11 | 09:03:43 | SR:-- | Yellow
                                                                                       25567_eyal-Y-MK1-837 - 25567_pnim_y-mk1-837_eyal.1.1 | 1 - A | 18-06-11 | 09:03:43 | SR:-- | Magenta
                                                                                       #
 Step-by-Step Instructions  Technical Characteristics                                  25567_eyal-Y-MK1-837 - 25567_pnim_y-mk1-837_eyal.1.1 | 1 - A | 18-06-11 | 09:03:43 | SR:-- | Cyan

                        Specification                        Description
 (3)  During Demo cycle device operating sequence is shown on   Not suitable for use in the
 the screen. Press    button to pause the simulation; press      Safety level in the presence of flammable   presence of flammable anesthetic
 button again to resume.  anesthetic gas mixtures or oxygen  mixtures with air, oxygen or
                                                    nitrous oxide
 (4)  When Demo cycle is completed, it is repeated automatically
 until interrupted by the operator.  Mode of operation  Continuous operation
           Ingress of liquids                       Not protected
 (5)  To exit Demo mode press    button and hold it for about 2
 seconds until a beep sounds.                       •  Use: in enclosed spaces
                                                    •  Ambient temperature:
                                                       10°C - 40°C
                                                       (50°F - 104°F)
  ®
 If measurement cable is connected to ProPex  II during Demo   Ambient conditions  •  Relative humidity:
 cycle, the device switches automatically to normal operation mode.  10% - 90%,
                                                       non-condensing
                                                    •  Operating altitude:
 6.9  Automatic Shutdown                               106 kPa to 70 kPa
                                                    •  Ambient temperature:
  ®
 ProPex  II automatically shuts down after 5 minutes without use. It is   -20°C - +60°C
 advisable, however, to manually switch off equipment after   (-4°F - 140°F)
 measurement by simply pressing the    key (On/Off).  •  Relative humidity:
           Conditions for transport and storage
                                                       10% - 90%,
                                                       non-condensing
                                                    •  Operating altitude:
                                                       106 kPa to 19 kPa
                                                    See Appendix 1 (page 169) and/
           EMC Tables
                                                    or Appendix 2 (page 176)























 22/184  B EU PIIS DFU PRT / Rev.04 / 02-2018 (Old ZF 1902127.X)  B EU PIIS DFU PRT / Rev.04 / 02-2018 (Old ZF 1902127.X)  31/184
   26   27   28   29   30   31   32   33   34   35   36