Page 10 - MOTOR-SISTEM UBRIZGAVANJA KLANN

Kapitel_6_3-4.fm Seite 254 Montag, 10. April 2017 11:05 11

Engine
Injection System

KL-0186-1612 H
KL-0186-1612 H
Pull Spindle, M16x1, 260mm long

Suitable for injector nozzles with an M16x1 internal thread, such as Denso
injectors. Installed in Toyota Diesel engines.
The pull spindle is required if the KL-0040-170 A hydraulic cylinder is to be used as a
drive for the injector nozzle puller KL-0186-14 K in conjunction with the vehicle-
specific upgrade kit KL-0186-1610 B.

KL-1383-1021 H
KL-1383-1021 H
Pull Spindle, M25x1

Suitable for injector nozzles with an M25x1 internal thread such as Siemens
Technical Data: injectors. Installed in PSA Diesel engines (DW10) etc.
Connection thread: M25x1
The pull spindle is needed if the KL-0040-170 A hydraulic cylinder is to be used as a
Length: 240mm drive for the KL-1383-14 K injector nozzle puller set.

KL-1383-1221 H
KL-0040-1751
KL-0040-1751
Spacer Ring

This tool is needed if the hydraulic cylinder KL-0040-170 A is to be used as a drive for
the injector nozzle puller KL-0369-46 K and KL-1383-10 K respectively.

6

Copyright GEDORE Automotive GmbH, Germany
formerly