Page 7 - MOTOR-SISTEM UBRIZGAVANJA KLANN
P. 7
Kapitel_6_3-4.fm Seite 251 Montag, 10. April 2017 11:05 11
Injection System
KL-0040-175 B KL-0040-175 B
Hydraulic Drive Tool Kit with Safety Belt
This tool kit enables the controlled extraction of very tight-fitting/seized injector
nozzles. It is used in conjunction with the injector nozzle puller set KL-0186-14 K and
a hydraulic pump equipped with a GEDORE Automotive pressure gauge.
The hydraulic cylinder with shoulder nut KL-0040-170 A together with a special pull
spindle (part no. ending with H) is placed onto the extraction bridge instead of the
mechanical drive. The special pressure gauge KL-0040-2529/KL-0040-2528 of the
hydraulic pump KL-0215-35 M25/KL-0215-37 M25 allows the applied force to be
monitored during the extraction process. The KL-0040-1790 safety belt included in
the kit is fixed to the vehicle and to the KL-0040-1700 hydraulic cylinder to secure
the latter against falling.
Technical Data: KL-0040-170 A
Maximum admissible force: 170KN (17t)
Maximum stroke: 15mm
Maximum oil volume: 41cm³
Maximum oil pressure: 700bar
Piston area: 27cm²
Cylinder outer diameter: 79mm
Cylinder overall height, (piston retracted): 89mm
Cylinder overall height, (piston extended): 104mm
Through hole in tubular piston: Ø 16.5mm
Hydraulic oil connection: 3/8“-18NPT
Weight: 2.7kg
Technical Data: KL-0583-1005 HA
Connection thread: M17x1
Length: 315mm
Technical Data: KL-0583-1032 H
Connection thread: M14x1.5
Length: 315mm
Scope of Delivery:
KL-0040-175 B Hydraulic Drive Tool Kit with Safety Belt
Description Qty
Hydraulic Cylinder, 17t (short design) 1 6
Pull Spindle, M17x1, with Nut, 315mm long 1
Pull Spindle, M14x1.5, 315mm long 1
KL-0215-35 M25 KL-0215-35 M25
Hydraulic Hand Pump
The KL-0215-35 M25 hydraulic hand pump is designed to be used as a drive for the
hydraulic cylinders KL-0040-2500 and KL-0040-170.
The hydraulic pressure and necessary force can be monitored while operating the
pump at pressure gauge KL-0040-2529 (supplied with the tool set). The pressure
gauge features an additional tonne scale specifically adapted to our KL-0040-2500
hydraulic cylinder (17t).
Technical Data:
Weight: 7.5kg
Max. pressure: 700bar
Note: A hydraulic hand pump with pressure gauge precisely adapted to the hydraulic cylinder
KL-0040-2200 (10t) or KL-0040-2800 (28t) available upon request.
Scope of Delivery:
KL-0215-35 M25 Hydraulic Hand Pump
Part No. Description Qty
KL-0215-33 Hydraulic Hand Pump (without hose) 1
KL-0215-31 Hydraulic Hose, 1.8m, with Hose-Side Connector 1
KL-0215-322 Cylinder-Side Connector, 1/4" NPT 1
KL-0040-2520 Adaptor, 3/8" NPT to 1/4" NPT 1
KL-0040-2529 Pressure Gauge 1
Copyright GEDORE Automotive GmbH, Germany
formerly
