Page 8 - MOTOR-SISTEM UBRIZGAVANJA KLANN

Kapitel_6_3-4.fm Seite 252 Montag, 10. April 2017 11:05 11

Engine
Injection System

KL-1383-1113 H
KL-1383-1113 H
Pull Spindle, M14x1.5

Suitable for injection nozzles with an M14x1.5 external thread.
Technical Data:
Connection thread: M14x1.5
Length: 240mm

KL-0369-4606 HA
KL-0369-4606 HA
Pull Spindle, M17x1 with Nut M27x1,
240mm long

Suitable for injector nozzles with an M17x1 internal thread, such as BOSCH
Technical Data: injectors. Installed in Alfa Romeo, BMW, Fiat, Mercedes, PSA (DW10) and
Connection thread for injector nozzle: M17x1 Renault Diesel engines.
Union nut: M27x1
The pull spindle is required if the KL-0040-1700 hydraulic cylinder is to be used as a
Length: 240mm
drive for the KL-0369-46 K, KL-1283-11 K, KL-1283-13 K, KL-1383-11 K, KL-1383-14 K
and KL-1683-10 K injector nozzle pullers.
Scope of Delivery: KL-0369-4606 HA Pull Spindle M17x1 with Nut
The advantage of using this tool is that - by screwing the pull spindle into the injector
Description Qty
nozzle and additionally screwing the corresponding union nut onto the injector - the
Pull Spindle, M17x1, 240mm long 1 applied pulling force is evenly distributed on both threads. This allows even very
Union Nut, M27x1 1 tight-fitting/stuck injector nozzles to be extracted with ease.
6 KL-0369-4606 A KL-0369-4606 A
Pull Spindle, M17x1, with Nut, M27x1,

132mm long
Technical Data: Suitable for injector nozzles with an M17x1 internal thread, such as BOSCH
Connection thread for injector nozzle: M17x1 injectors. Installed in Alfa Romeo, BMW, Fiat, Mercedes, PSA (DW10) and
Union nut: M27x1 Renault Diesel engines.
Length: 132mm The pull spindle upgrades our KL-0369-46 K, KL-1283-11 K, KL-1283-13 K,
KL-1383-11 K and KL-1683-10 K tools sets so that these can also be used with very tight-
Scope of Delivery: KL-0369-4606 A Pull Spindle, M17x1 with Nut
fitting/seized injector nozzles. The advantage of using this tool is that - by screwing the
Description Qty pull spindle into the injector nozzle and additionally screwing the corresponding union
Pull Spindle, M17x1, 132mm long 1 nut onto the injector - the applied pulling force is evenly distributed on both threads.
Union Nut, M27x1 1 This allows even very tight-fitting/stuck injector nozzles to be extracted with ease.

Copyright GEDORE Automotive GmbH, Germany
formerly