Page 9 - MOTOR-SISTEM UBRIZGAVANJA KLANN

Kapitel_6_3-4.fm Seite 253 Montag, 10. April 2017 11:05 11

Injection System

KL-0186-1711 H KL-0186-1711 H
Pull Spindle, M18

The pull spindle is needed if the KL-0040-170 A hydraulic cylinder is to be used as a
drive for the injector nozzle puller KL-0186-14 K in conjunction with the vehicle-
Technical Data:
specific upgrade kit KL-0186-170.
Connection thread: M18
Length: 250mm

KL-0186-1611 A

Pull Spindle, M20x1, with 2 Nuts M25, 145mm long
For application, see KL-0186-1611 HA.
(Engine codes: 198A3.000, 1KD-FTV, 2AD-FT, 2KD-FTV, 4D56, 4HM, 4HU, 4HV, 4JJ1, Technical Data:
4JK1, 4M41, 6DE1, A16FDH, A16FDL, A17DT, A17DTC, A17DTJ, A17DTR, CD-FTV,
Connection thread: M20x1
CYFA, CYFB, CYFC, DRFA, DRFB, DRFC, P22DTE, P8FA, P8FB, P9X, PGFA, PGFB, QVFA,
Union nut (KL-0186-1611-2): M25x0.5
QWFA, RF5C, RF-DI, SRFA, SRFB, SRFC, SRFD, SRFE, UHFA, USRA, YD22, YD25.)
Union nut (KL-0186-1611-3): M25x0.75
The pull spindle upgrades the universal injector nozzle puller set KL-0186-14 K (in
Length: 145mm
conjunction with the respective vehicle-specific upgrade kit KL-0186-1610 A or
KL-0186-220) by making it suitable for use also on very tight-fitting/seized injector Scope of Delivery: KL-0186-1611 A Pull Spindle M20x1, with 2 Nuts
nozzles.
Description Qty
The advantage of using this tool is that - by screwing the pull spindle into the injector
Pull Spindle, M20x1, 145mm long 1
nozzle and additionally screwing the corresponding union nut onto the injector - the
Union Nut, M25x0.5 1
applied pulling force is evenly distributed on both threads. This allows even very
Union Nut, M25x0.75 1
tight-fitting/stuck injector nozzles to be extracted with ease.

6

Copyright GEDORE Automotive GmbH, Germany
formerly