Page 16 - MOTOR SVJEĆICE I GRIJAČI KLANN
P. 16
Kapitel_6_5-6.fm Seite 311 Montag, 10. April 2017 1:00 13
Glow Plugs / Spark Plugs, PSA
KL-1383-291 K KL-1383-291 K
Thread Cleaning Kit
for Glow Plug Retaining Thread M8x1
Suitable for use on PSA 2.2 16V (DW12) and Fiat 2.3 (F1A); 3.0 (F1C, F30 DT) JTD/
HDI Diesel engines as installed in Citroën, Peugeot, Ford, Fiat, Jaguar, Lancia,
IVECO etc.
The KL-1383-291 K thread cleaning kit enables the removal/drilling out of damaged
glow plugs as well as retapping the original M8x1 retaining thread.
Scope of Delivery:
KL-1383-291 K Thread Cleaning Kit for Glow Plug Retaining Thread M8x1
Part No. Description Qty
KL-0369-300 A Roller-Type Stud Removal Socket 1
KL-0369-306 Tool Holder with Square Socket, 2.4-5.5mm 1
KL-4007-2510 Adaptor for Power Drill, 3/8“ 1
KL-1683-2051 Pilot Drill, Ø 7.1mm for M8x1 1
KL-1683-2052 Screw Tap, M8x1 1
KL-1383-2241 Screw Tap, 12-24 UNC, with Drill Bit 1
KL-0132-5501 Puller Bolt, No. 12-24 UNC, for Slide Hammer Puller 1
KL-0126-221 Flexible Magnetic Lifter 1
Plastic Storage Case 1
KL-1683-20-2 K KL-1683-20-2 K
Upgrade Kit for KL-1383-291 K
to form KL-1683-20 K
Suitable for use on Fiat 2.3 (F1A) and 3.0 (F1C, F30 DT) JTD/HDI Diesel engines
as found in Fiat Ducato, IVECO Daily, Citroën Jumper, Peugeot Boxer.
The KL-1683-20-2 K upgrade kit is designed to be used with the KL-1383-291 K
thread cleaning kit, thus enabling the precise removal/drilling out of damaged glow 6
plugs and re-tapping the original M8x1 thread. It also allows for the repair of
damaged M8x1 glow plug retaining threads by drilling up to M10x1. Then, a new
glow plug along with a threaded sleeve (M10x1 to M8x1) can be screwed into the
cylinder head. With the aid of the compressed air adaptor included in the set, air can
be injected into the combustion chamber so as to prevent dirt and swarf from
entering the latter.
Scope of Delivery:
KL-1683-20-2 K Upgrade Kit for KL-1383-291 K to form KL-1683-20 K
Part No. Description Qty
KL-1683-2012 Centring Sleeve 1
KL-1683-201 Base Fitting Strip, 2.3 JTD 1
Base Fitting Strip, 3.0 JTD 1
KL-1683-2031 Guide Sleeve for Milling Cutter 1
KL-1683-2032 Milling Cutter for Glow Plug Electrode 1
Milling Cutter for Glow Plug Electrode (Spare) 1
KL-1683-2041 Guide Sleeve for Drill 1
KL-1683-2061 Pilot Drill, Ø 9.1mm for M10x1 1
KL-1683-2062 Screw Tap, M10x1 1
KL-1383-2234 Set of Threaded Sleeves M8x1, 16mm long (10-piece) 1
KL-0283-7050 Puller (Base Tool) 1
Support Sleeve for Puller 1
Shoulder Nut 1
KL-1383-2242 Puller Bolt, No.12-24 UNC, 165mm long 1
Compressed Air Adaptor, M10x1 1
KL-1683-2081 Guide Sleeve for Reamer 1
KL-1683-2082 Reamer, Ø 6.9/4.9mm 1
Plastic Storage Case 1
Copyright GEDORE Automotive GmbH, Germany
formerly
