Page 11 - VW AUDI ALATI ZA ZUPČENJE KLANN

Kapitel_6_5-6.fm Seite 343 Montag, 10. April 2017 1:00 13

Engine Timing / Valve Train, VW-Audi (Diesel + Petrol)

KL-0282-31 KL-0282-31
Reaction Wrench
(420mm long, adjustable)

Suitable for use on perforated timing belt sprockets with a hole Ø not smaller
than 12mm, as found in VW-Audi, Seat, Fiat, Ford, Opel/Vauxhall, Peugeot,
Renault, Citroën, Rover, Volvo, Isuzu, Japanese vehicles, etc.
With interchangeable pins and different hole pitches. Designed to prevent timing
belt sprockets on camshafts, injection pumps, etc. from rotating; for example, when
loosening the central fastening screw. Due to the different pin Ø and hole pitches,
this wrench is almost universal in its range of application.
Technical Data:
Pitch between pins: 45-75mm
Pin Ø: 12mm and 16mm
Pin height: 61mm
Overall tool length: 420mm

KL-0282-35 B KL-0282-35 B

Reaction Wrench Set
(470mm long, adjustable)

Universally suitable for use on perforated timing belt sprockets with a hole Ø
not smaller than 6.5mm as found in: VW-Audi, Seat, Škoda, Alfa, Fiat, Lancia,
Dacia, MG, Nissan, Ford, Opel/Vauxhall, Peugeot, Renault, Citroën, Rover,
Volvo, Suzuki, Isuzu, Japanese vehicles, etc.
Designed to prevent timing belt sprockets on camshafts, injection pumps, etc. from
rotating, for example, when loosening/tightening the central fastening bolt. Thanks
to the different interchangeable pins and the adjustable lever allowing for variable
adjustments to hole diameters and pitches, this tool is nearly universally applicable.
Scope of Delivery:
KL-0282-35 B Reaction Wrench Set (470mm long, adjustable)
Part No. Description Qty 6
KL-0282-35 Reaction Wrench (adjustable) 1 Technical Data:
KL-0282-311 Set of Pins, Ø 18mm 1 Pitch between pins: from 14mm to 130mm
KL-0282-312 Set of Pins, Ø 7.5mm 1 Pin Ø: 6mm, 7.5mm, 12mm, 18mm
KL-0282-313 Set of Pins, Ø 6mm 1 Pin height: 25mm/42mm
Overall tool length: 470mm

KL-0284-10 KL-0284-10
Technical Data:
Adjustment Tool for Timing Belt Tensioner Drive: 3/8" or by a mandrel
Length: 47mm
Suitable for VW-Audi engines. Depth: 32.5mm
Designed to be used for adjusting the tension of the timing belt. The tool can be Ø 4.0/6.0mm
operated from a variety of angles - depending on the space available. Weight: 70g

KL-0284-91 A KL-0284-91 A
Adjustment Tool for Timing Belt Tensioner,

VW-Audi, Seat, Škoda
(Engine codes: AAC, AEG, AEH, AGR, AHF, AKL, AKS, ALH, ALZ,
Applicable to VW-Audi, Seat, Škoda 1.6, 1.9 and 2.0 litre petrol and Diesel engines.
APF, APK, AQY, ASV, ASY, ASZ, ATD, ATM, AVQ, AVU, AWA,
Designed to be used for adjusting the tension of the timing belt. The adjustable AWF, AWG, AXA, AXB, AXC, AXR, AXW, AXX, AYD, AZG, AZH,
multi-position head of the tool allows the tensioner pulley to be operated even in AZJ, AZL, AZM, AZV, BDK, BEH, BFQ, BFS, BGB, BGU, BHD,
confined spaces.
BHZ, BJB, BKC, BKD, BKP, BLR, BLB, BLR, BLS, BLT, BLX, BLY,
BMA, BMB, BMM, BMN, BMP, BMR, BMT, BNA, BPG, BPJ, BPY,
BRD, BRE, BRF, BRM, BRT, BRU, BSE, BSF, BSU, BSX, BUL, BUZ,
BVA, BVE, BVF, BVG, BVH, BVX, BVY, BVZ, BWA, BWA1, BWE,
BWJ, BWT, BXE, BYD, BYK, BZC, CCSA, CDLA, CDLB, CDLC,
CDLD, CDLF, CDMA, CHGA, CMXA)

Copyright GEDORE Automotive GmbH, Germany (343) 6.6-15
formerly