Page 7 - VW AUDI ALATI ZA ZUPČENJE KLANN

Kapitel_6_5-6.fm Seite 339 Montag, 10. April 2017 1:00 13

Engine Timing / Valve Train, VW-Audi (Diesel)

KL-0184-021 KL-0184-021
Counter-Holding Tool, VW

Applicable to VW-Audi (2.4 and 2.5 litre) 4- and 5-cylinder engines, both with
and without vibration damper; as found on: VW Crafter, T4.
(Engine codes: AJA, BJJ, BJK, BJL, BJM, CEBA, CEBB, CECA, CECB)
This tool is designed to counter-hold the crankshaft pulley while loosening/
tightening the crankshaft central screw.
An indispensable tool when replacing timing belts, sealing rings or flywheels, as well
as for engine repairs.

Scope of Delivery: KL-0184-021 Counter-Holding Tool, VW
Part No. Description Qty
KL-0184-0210 Counter-Holding Tool (base tool with adaptor) 1
KL-0184-0101 Extension Tube with Protective Handle 1
KL-0184-0102 Extension Tube 3
KL-0184-0103 Folding Spring Bolt 4

Scope of Delivery: KL-0184-0210 Counter-Holding Tool (Base Tool with Adaptor)
Part No. Description Qty Technical Data:
KL-0184-0211 Counter-Holding Tool (Base Tool) 1 Overall length (assembled tool): 1.8m
KL-0284-6101 Adaptor 1 Length of extension tube: 400mm
KL-0284-6102 Special Cheese Head Screw 4 Length of extension tube with protective handle: 403mm
KL-0284-6106 Cheese Head Screw, M8x65mm 4 Length of base tool: 401mm
KL-0284-62 Hex Socket 1 Drive of hex socket: 1/2“

KL-0280-105 KL-0280-105
Locking Tool Set, VW-Audi

Applicable to VW-Audi 2.5 TDI V6 and Audi A8 3.3 TDI V8 engines.
(Engine codes: AFB, AKE, AKF, AKN, AMY, BAU, BCZ, BFC, BDG, BDH).
Designed for the locking of camshafts and crankshaft.
Indispensable tool set when replacing a timing belt or performing an engine repair.
Scope of Delivery: KL-0280-105 Locking Tool Set, VW-Audi
Part No. Description Qty 6
KL-0280-92 Setting Gauge for Camshafts 2
KL-0280-10 Locking Pin for Crankshaft 1

KL-0280-25 K KL-0280-25 K

Locking Tool Set, VW-Audi 2.5 TDI V6
Applicable to the VW-Audi 2.5 TDI V6 Diesel engines.
(Engine Codes: AFB, AKE, AKF, AKN, AMY, BAU, BCZ, BFC, BDG, BDH)
This tool set is designed to lock/position engine shafts such as camshafts, injection
pump shaft and crankshaft. It can also be used for locking and adjusting the timing
belt tensioner while replacing a timing belt or during an engine repair.
The guide pins included in the set are required to pull the front carrier forwards. As a
result, the removal of the front carrier is no longer necessary.
Scope of Delivery: KL-0280-25 K Locking Tool Set, VW-Audi 2.5 TDI V6
Part No Description Use
KL-0280-10 Locking Pin For locking the crankshaft.
KL-0280-92 Setting Gauge (2 units) For locking the camshafts.
When changing a timing belt or during an engine
Guide Pin Set for Front- repair it is necessary to pull the front carrier on the
KL-0286-11
End Carrier guide pins forwards. As a result, the removal of the
front carrier is no longer required.
KL-1480-16 Locking Pin, Ø 6x60mm For locking the injection pump sprocket.
KL-0180-3012 Retaining Pin, Ø 1.2mm For locking the automatic timing belt tensioner.
For tightening the tensioner of the injection pump
KL-0369-10 Hex Socket, 22mm (waf)
pulley.
KL-0280-2501 Locking Pin, Ø 4.4mm For locking the V-ribbed belt tensioner tool.

Copyright GEDORE Automotive GmbH, Germany (339) 6.6-11
formerly