Page 13 - MOTOR-SISTEM KAIŠEVA KOD MOTORA KLANN

Kapitel_6_7-9.fm Seite 439 Dienstag, 11. April 2017 8:09 08

Accessory Belt Drive System

KL-0155-42 (Patented) KL-0155-42
V-Ribbed Belt Pulley Puller

Universally suitable for use on perforated V-ribbed belt pulleys with diameters
of from 120-180mm.
Two tools in one. This tool is designed to hold the pulley in position while loosening
the central fixing screw, as well as to remove the V-ribbed belt pulley; for example, at
the crankshaft, servo pump etc. Any standard 1/2" ratchet or sliding T bar can be used
as a holding tool.
Scope of Delivery: KL-0155-42 V-Ribbed Belt Pulley Puller
Part No. Description Qty
KL-0155-4201 Bridge 1
KL-0155-4202 Pressure Piece with O-Ring and Balls 1
KL-0183-5401 Housing 1
KL-0183-5402 Spindle, M16x1.5x60mm 1
KL-0155-4203 Clamping Jaw, R70 2
KL-0155-4204 Bolt, Ø 6mm 2
KL-0155-4205 Bolt, Ø 12mm 2
KL-0155-4206 Slide Bush 2
KL-0155-4207 Flat-Head Screw, M10x30mm 2
KL-0350-0009 Shoulder Nut, M10 2
KL-0183-50 (Universal) (Patented) KL-0183-50

Timing Belt Sprocket Extractor and
Reaction Tool

Universal application - Two tools in one. The tool can be used for loosening the
central fixing screw as well as for removing the sprocket. Suitable for all the
perforated timing belt sprockets with a pitch circle diameter of from 70-100mm.
Hole diameters should not be less than 20mm.
The tool is used to hold the pulley in position while loosening/tightening the central fixing
screw. It is also designed to prevent the pulley from rotating while removing the sprocket.
For this, any standard 1/2“ ratchet or 1/2“ sliding T-Bar can be used as a holding tool.
Scope of Delivery: KL-0183-50 Timing Belt Sprocket Extractor and Reaction Tool
Part No. Description Qty 6
KL-0183-510 Perforated Puller Disc 1
KL-0183-531 Hook, Ø 20mm 3
KL-0183-532 Hook, Ø 26mm 3
KL-0350-0009 Shoulder Nut, M10 3
KL-0183-540 Pressure Unit 1
KL-0183-51 A (Patented) KL-0183-51 A

Timing Belt Sprocket Extractor and
Reaction Tool with 2 Hooks

Applicable to VW-Audi, Seat, Škoda, Opel/Vauxhall, Ford, BMW, Mercedes,
Peugeot, Citroën, Renault, Fiat, Japanese vehicles etc.
Universal application - Two tools in one. Very useful tool for loosening the central
fixing screw and for removing the sprocket. Suitable for all the perforated timing belt
sprockets with a pitch circle diameter of from 70-100mm. Hole diameters should not
be less than 16.5mm. The tool is used to hold the pulley in position while loosening/
tightening the central fixing screw. It is also designed to prevent the pulley from
rotating while removing the sprocket. For this, any standard 1/2“ ratchet or 1/2“
sliding T-Bar can be used as a holding tool.
Scope of Delivery: KL-0183-51 A Timing Belt Sprocket Extractor and Reaction Tool
Part No. Description Qty
KL-0183-510 Perforated Puller Disc 1
KL-0183-533 Hook, Ø 16.5mm 2
KL-0350-0009 Shoulder Nut, M10 2
KL-0183-540 A Pressure Unit 1
Accessories:
KL-0183-531 Hook, Ø 20mm
KL-0183-532 Hook, Ø 26mm

Copyright GEDORE Automotive GmbH, Germany (439) 6.7-12
formerly