Page 18 - MOTOR-SISTEM KAIŠEVA KOD MOTORA KLANN

Kapitel_6_7-9.fm Seite 444 Dienstag, 11. April 2017 8:09 08

Engine
Accessory Belt Drive System

KL-0284-81
KL-0284-81
Holding Tool

Suitable for use on VW Passat (1997 onwards) and Audi A4 (1999 onwards) etc.
Designed to counter-hold the pulley on the power steering pump. For example,
necessary when loosening and tightening the fastening screws on the pulley.
Advantages:
• The 1/2“ drive in the tool handle enables the tool to be extended, for example by a
ratchet.
• Facilitates the loosening of stubborn fastening screws on the pulley.
Technical Data:
Length: Height: Inner-Ø: Screw retaining Ø: Weight:
250mm 23mm 38mm 16mm 450g
KL-0582-1
KL-0582-1
Holding Tool for Viscous Fan, BMW
Suitable for use on BMW engines, e.g. M20 and M30.
Designed to counter-hold the fan shaft when removing the viscous fan.
Technical Data:
Hole pitch: 38mm
Weight: 500g

KL-0582-2
KL-0582-2
Holding Tool for Viscous Fan, BMW

Suitable for use on BWM engines, e.g. M10, M20, M21, M30, M50, M51, M52,
M52TU, M54, M56, M70, M73, S14 and S38.
Designed to counter-hold the fan shaft when removing the viscous fan.
Technical Data:
6 Hole pitch: 44.5mm
Weight: 400g
KL-0123-1 A
KL-0123-1 A
Reaction Wrench, Size (waf) 32mm
Designed to counter-hold the viscous clutch drive shaft when removing/installing
the viscous clutch on BMW and Ford vehicles.
Technical Data:
Size (waf): 32mm
Length: 280mm
Height: 11mm
Weight: 340g

KL-0366-81
KL-0366-81
Counter-Holding Tool, Mercedes

Suitable for use on Mercedes engines, e.g. M112, M113 and OM642, etc.
This tool is designed to counter-hold the crankshaft pulley when loosening/
tightening the crankshaft central screw.
It is required when replacing pulleys or for engine repairs.
Scope of Delivery: KL-0366-81 Counter-Holding Tool, Mercedes
Part No. Description Qty
KL-0366-800 Bolt Set, Ø 20mm 1
KL-0366-801 Bolt Set, Ø 15mm 1
KL-0366-8001 Perforated Disc 1
KL-0350-2007 Hex Shoulder Nut, M12 3

6.7-17 (444) Copyright GEDORE Automotive GmbH, Germany
formerly