Page 19 - MOTOR-SISTEM KAIŠEVA KOD MOTORA KLANN

Kapitel_6_7-9.fm Seite 445 Dienstag, 11. April 2017 8:09 08

Accessory Belt Drive System

KL-0367-1 KL-0367-1
Locking Tool

Suitable for use on Mercedes engines such as M103.
This tool allows for the loosening of the viscous fan pulley (locking the fan pulley).

KL-0366-5 KL-0366-5

Special Opend-End Wrench, Size (waf) 36mm
Application: Mercedes engines M111, OM604, OM605 and OM606 (C- and
E-Class).
This special open-end wrench is designed to loosen the screws on fans. Technical Data:
Length: 350mm

KL-0366-7 KL-0366-7
Reaction Wrench

Suitable for use on Mercedes M111 engines as installed in C- and E-Class
vehicles (4-cylinder 4-valve), OM604, OM605 and OM606.
With 3 boreholes.
In order remove the cooling fan hub, the reaction wrench is bolted to the front face Technical Data:
of the hub. The V-ribbed belt is not in place during this operation. Length: 410mm

KL-0366-6 KL-0366-6

Special Open-Ended Wrench, Size (waf) 65mm
Suitable for use on Mercedes engines M103 (6-cylinder), M104 (6-cylinder
4-valve), M119 (8-cylinder 4-valve), M120 (12-cylinder 4-valve). 6
Special open-ended wrench for the removal/installation of the cooling fan hub.
Technical Data:
Length: 400mm

KL-0384-1 KL-0384-1
Tensioner Tool (V-Ribbed Belt), Mercedes

Suitable for use on Mercedes Transporters of the 208 D to 410 D Series, eqipped
with either an OM601 or OM602 engine; also for Mercedes passenger cars fitted
with a hydraulic pump for self-levelling suspension.
The tool is used to relieve tension on the V-ribbed belt by pushing back the automatic
tensioner pulley. Due to the extremely limited space available, in particular on
Transporter models, it is very difficult to push back the automatic tensioner pulley in
order to change the V-ribbed belt. The KL-0384-1 tensioner tool is designed to make
light work of this difficult job. The tool is operated by a 3/8" socket spanner.
KL-0384-10 KL-0384-10

Locking Tool, Mercedes

Applicable to Mercedes-Benz A-, B-, C-, CLC-, CLK-, CLS-, E-, G-, GL-, M-, R-, S-, SLK-,
V-Class, Sprinter, Vito and Viano vehciles equipped with either a petrol engine
(engine codes: M104, M111, M112, M119, M120, M272, M273) or a Diesel engine
with 4-valve-technology. Technical Data:
(Engine codes: OM605, OM606, OM611, OM612, OM613, OM614, OM628,
Ø: 5.8/6.0mm
OM629, OM640, OM642, OM643, OM646, OM646 EVO, OM647, OM648, OM649)
Designed to lock the camshafts when removing the cylinder head.

Copyright GEDORE Automotive GmbH, Germany (445) 6.7-18
formerly