Page 4 - MOTOR-SISTEM KAIŠEVA KOD MOTORA KLANN

Kapitel_6_7-9.fm Seite 430 Dienstag, 11. April 2017 8:09 08
Engine
Accessory Belt Drive System
KL-0284-19
KL-0284-37
6 Drive (Socket Insert) (B):
KL-0284-40
Accessories (on demand):
6.7-03 (430) Copyright GEDORE Automotive GmbH, Germany
KL-0284-19
Alternator Combination Socket
For example, suitable for use on BMW 1 Series (F20); Mercedes A-Class, C-Class;
Renault 1.9 DTI.
This two-part alternator combination socket allows for the easy removal and
installation of the overrunning alternator pulley when replacing an alternator or a
pulley. Since the pulley cannot be counter-held from the outside while slackening or
tightening the central nut, the Torx® T50 socket insert bit is needed to counter-hold
the pulley shaft during the loosening process.
Technical Data:
Socket Insert (A): Torx® T50
Drive (Socket Insert) (B): 1/2"
Union nut with 33 teeth, outer Ø (C): 19.5mm
Drive (Union nut) (D): 21mm
Length: 110mm
Weight: 156g
® = reg. trademark of Acument Intellectual Properties, LLC. USA
KL-0284-37
Alternator Combination Socket
Suitable for use on the rubber-mounted alternator pulleys installed in Renault
and Dacia 1.4 and 1.6 litre petrol engines.
Applications: Renault Clio, Laguna, Mégane, Scénic, and Dacia Logan.
This two-part alternator combination socket allows for the easy removal and
installation of the overrunning alternator pulley when replacing an alternator or a
pulley.
Since the pulley cannot be counter-held from the outside while slackening or
tightening the central nut, the pulley shaft needs to be locked by means of the 10mm
XZN multi-spline insert bit during the loosening process.
Technical Data:
Socket Insert (A): XZN - M10
1/2"
Union nut with hexagon (C): 28mm
Drive (Union nut) (D): 21mm
Length: 110mm
Weight: 110g
KL-0284-40
Alternator Combination Socket, T50
Suitable for use on alternators with overrunning alternator pulley, as found in:
Opel/Vauxhall, Fiat, Alfa.
This alternator combination socket allows for the easy removal and installation of the
overrunning alternator pulley when replacing an alternator or a pulley.
Since the pulley cannot be counter-held from the outside while loosening or
tightening the central nut, the pulley shafts need to be locked by means of the Torx®
T50 socket insert bit during the loosening process.
Technical Data:
Socket insert (A): Torx® T50
Drive (Socket insert) (B): 1/2"
Union nut with 31 teeth, outer Ø (C): 14mm
Drive (Union nut) (D): 21mm
Length: 110mm
Weight: 140g
® = reg. trademark of Acument Intellectual Properties, LLC. USA
1993 U-20 CODE:1436686 - Reversible ratchet
DMK 200 CODE:2641240 - Torque Wrench Dremaster 40-200Nm
formerly