Page 5 - MOTOR-SISTEM KAIŠEVA KOD MOTORA KLANN

Kapitel_6_7-9.fm Seite 431 Dienstag, 11. April 2017 8:09 08

Accessory Belt Drive System

KL-0284-42 KL-0284-42
Alternator Combination Socket, T50

Suitable for use on alternators with overrunning alternator pulley, as found in:
VW-Audi, Seat, Škoda etc.
This alternator combination socket allows for the easy removal and installation of the
overrunning alternator pulley when replacing an alternator or a pulley.
Since the pulley cannot be counter-held from the outside while loosening or
tightening the central nut, the pulley shaft needs to be locked by means of the Torx®
T50 socket insert bit during the loosening process.
Technical Data:
Socket insert (A): Torx® T50
Drive (Socket insert) (B): 1/2"
Union nut with 32 teeth outer Ø (C): 17mm
Drive (Union nut) (D): 21mm
Length (G): 110mm

KL-0284-41 KL-0284-41

Alternator Combination Socket, XZN-M10
Suitable for use on alternators with overrunning alternator pulley, as found in:
Opel/Vauxhall, Fiat, Alfa.
This alternator combination socket is designed for the removal and installation of the
overrunning alternator pulley when replacing an alternator or a pulley.
Since the pulley cannot be counter-held from the outside while loosening or
tightening the central nut, the pulley shaft needs to be locked by means of the XZN-M10
socket insert bit during the loosening process.
Technical Data:
Socket insert (A): XZN-M10
Drive (Socket insert) (B): 1/2"
Union nut with 31 teeth outer Ø (C): 14mm
Drive (Union nut) (D): 21mm
Length: 110mm 6
Weight: 140g

KL-0284-28 KL-0284-28
Alternator Combination Socket

Suitable for use on alternators with overrunning alternator pulley, as found in
VW-Audi, BMW, Ford, Škoda, Mercedes, Opel/Vauxhall, Porsche, Renault, etc.
This short two-part alternator combination socket allows for the easy removal and
installation of a overrunning alternator pulley in-situ on the vehicle without the need
for removing the alternator.
Since the pulley cannot be counter-held from the outside while slackening or
tightening the central nut, the pulley shaft needs to be locked by means of the 10mm
XZN multi-spline insert during the loosening process.
Technical Data:
Socket insert (A): XZN-M10
Drive Size (waf) (B): 12mm
Union nut with 33 teeth, outer Ø (C): 19.5mm
Drive (Union nut) (D): 21mm
Length: 64mm
Weight: 95g

Accessories (on demand): 7 R - Combination Ratchet Spanner
4549-05 CODE:1545140 - Torque Wrench TORCOFIX K 3/8“ 5-50Nm

Copyright GEDORE Automotive GmbH, Germany (431) 6.7-04
formerly