Page 8 - MOTOR-SISTEM ZA GORIVO KLANN

Kapitel_6_1-2.fm Seite 225 Montag, 10. April 2017 10:21 10

Fuel System

KL-0122-702 KL-0122-702
Fuel Filter Socket, Ø 82mm

Suitable for Volvo Diesel vehicles equipped with fuel filter cartridge such as S60,
S80, V70, XC70, XC 90, with 2.4 D or 2.4 D5 engines.
This fuel filter socket is intended for the removal and installation of the fuel filter cap
when replacing a fuel filter cartridge.
Technical Data:
Drive: 3/8“
Internal Ø: 82mm
Ribs: 6 ribs

KL-0122-608 KL-0122-608
Fuel Filter Socket, Ø 109mm

Suitable for Peugeot, Citroën, Renault, Fiat and Lancia etc.
For Fuel Filter with Ø 109mm and 8 Ribs.
This fuel filter socket is required to remove and install the fuel filter cap when
replacing the fuel filter cartridge.
Technical Data:
Drive (square): 3/8"

KL-0122-610 KL-0122-610

Fuel Filter Socket, Ø 109mm, 6 Ribs
Suitable for Fiat 1.3, 1.9 JTD and Opel/Vauxhall 2.0 Diesel engines: Antara (from
2007 onwards), Insignia (from 2009 onwards). Engine code : A 20 DTJ, Z 20 DMH.
For fuel filters with Ø 109mm and 6 ribs.
This fuel filter socket is intended for the removal and installation of the fuel filter cap
when replacing a fuel filter cartridge.
6
Technical Data:
Drive (square): 3/8"

KL-0289-10 KL-0289-10

Fuel Filter Cap Installation Tool
Suitable for the VW-Audi, Seat and Škoda Diesel vehicles fitted with a UFI fuel
filter unit.
Very useful tool allowing for the torsion-free mounting of fuel filter caps on fuel filters;
required, for example, after changing the fuel filter cartridge.
The fuel filter cap installation tool is designed to press the fuel filter cap evenly and in
a torsion-free manner into the seal seat in the fuel filter housing. Then, the fuel filter
can be fixed according to the manufacturer’s instructions.

Scope of Delivery:
KL-0289-10 Fuel Filter Cap Installation Tool
Part No. Description Qty
Spindle with T-Handle 1
Base Tool 1
Thrust Piece 1

Note: If a fuel filter cap is inserted into the seal seat in the fuel filter housing
without the use of our special tool but by means of the fastening screws, there
is a risk that the fuel filter cap is subjected to torsional stress during installation
which could lead to leakage in the fuel filter unit.

Copyright GEDORE Automotive GmbH, Germany
formerly