Page 133 - Michigan Drill

Profiling Multi-Tool Blade
™

45° Chamfering Blades

These blades are used to chamfer holes from 1" to 4-3/8" in diameter.
When used in the same set up and holder which produced the hole,
close concentricity can be achieved. Please inquire

D-Series Chamfering Range HOLE MAKING
largest Diameter
Range of Hole Diameter Blade Price
(from A to B) No. Each
3/4 – 1-1/8 DBA36 29.86
1-1/8 – 1-3/8 DBA44 32.85 Smallest
1-3/8 – 1-3/4 DBA56 36.11 Diameter
1-3/4 – 2-1/8 DBA68 39.74
2-1/8 – 2-1/2 DBA80 43.69
2-1/2 – 2-7/8 DBA92 48.07

E-Series Chamfering Range

Range of Hole Diameter Blade Price
(from A to B) No. Each
1 – 1-3/8 EBA44 38.47
1-3/8 – 1-3/4 EBA56 40.39 Special order multi-diameter
1-3/4 – 2-1/8 EBA68 42.95 and chamfering blades
2-1/8 – 2-1/2 EBA80 49.39
2-1/2 – 2-7/8 EBA92 56.81
2-7/8 – 3-1/4 EBA104 65.34 Do you have a job with unique specifications?
3-1/4 – 3-5/8 EBA116 71.86 Counterbore profiles may be special ordered to your print.
3-5/8 – 4 EBA128 79.05 Please inquire.
4 – 4-3/8 EBA140 86.94

Carbide Tipped

Annular Cutters

List No. CT251 – 1" Depth of Cut
List No. CT252 – 2" Depth of Cut

All cutters come with 3/4" shank diameter with two flats. The MDX Annular
Cutter is made of sturdy M-2 Steel construction, which enables you to cut a
burr free hole. MDX's Annular Cutter penetrates rapidly, cutting only the
periphery of the hole thus allowing the pilot pin to eject the center plug of steel.
Price Each Price Each

1" Depth 2" Depth 1" Depth 2" Depth
Diameter Of Cut Of Cut Diameter Of Cut Of Cut
of Cut of Cut
CT251 CT252 CT251 CT252
9/16 42.93 45.68 1-3/8 56.78 63.26
5/8 42.93 45.68 1-7/16 62.90 71.12
11/16 42.93 45.68 1-1/2 62.90 71.12
3/4 42.93 45.68 1-9/16 62.90 71.12
13/16 42.93 46.66 1-5/8 75.61 84.77
7/8 42.93 46.66 1-11/16 75.61 84.77
15/16 44.15 47.91 1-3/4 75.61 84.77
1 44.15 47.91 1-13/16 86.39 97.61
1-1/16 48.60 52.53 1-7/8 86.39 97.61
1-1/8 48.60 52.53 1-15/16 86.39 97.61
1-3/16 48.60 52.53 2 97.77 110.52
1-1/4 56.78 63.26 2-1/16 97.77 110.52
1-5/16 56.78 63.26
Please see page 132 for our other anular cutters.

131