Page 48 - ZKTime.net3_.0-Software-User-Manual-V1.0

Late exceed _ minutes, count as absent: The default value is 0 minute, you can modify as required.
After ticking ( ) and selecting this option, if the Check-In Time is 9 a.m, all punches after 9 a.m, will be
counted as absent.

Early leave exceed _ minutes, count as absent: The default value is 0 minute, you can modify as required.
After ticking ( ) and selecting this option, if the Check-Out Time is 18 p.m, all punches before 18 p.m, will be
counted as absent.

Active automatic schedule for no-shift employee: After ticking ( ) and selecting this option, the system will
use the default shift to schedule for no-shift employee automatically.

Active attendance status: If tick ( ) and select this option, the system will identify the attendance
status of the attendance records downloaded from the device according to the preset attendance
status on the device. If you do not select this option, the system will identify the attendance status of
the attendance records downloaded from the device according to the odd and even numbers of the
attendance records, where an odd number represents “Check-in’ and an even number represents “Check-
out”. Specifically, the first attendance record is “Check-in”, the second is “Check-out”, the third is “Check-in”,
the fourth is “Check-out”, and the like.

Active Round setting (Attendance > Timetable > Round Setting): By ticking ( ) and selecting this option,
to activate the Round Setting function, otherwise, to disable it.

6.2 Timetable Setting

You can set all timetables that may be used during the attendance procedure, and then set each option as
required. Such as Check-In /Out Time, Late Arrival/Early Out time, Break and Rounding setting, etc.

Before shift setting, you must set all the timetables that might be used. Only after employees are assigned to
shifts, you can collect and calculate employee attendance time based on the attendance parameters.

Click [Attendance] >
[Timetable] to enter to the
Timetable setting interface.

The system has a timetable named
Default by default. You can modify
it as required, but undeletable.

ZKTime.Net 3.0 41