Page 52 - ZKTime.net3_.0-Software-User-Manual-V1.0

Day Change at: Set the day change time, namely, the end time of day’s work time statistics. Fox example, the
Day Change time is 23 o’clock; the work time after 23 o’clock, will be counted as the second day’s work time.

Only consider first and last Records one day: After ticking ( ) and selecting this option, the system will only
record the first and last effective punch records; other punch records will be considered as invalid records. The
terminal will only store the effective punch records.

OT Level 1/2/3 Work Time Exceed: Set and select as required. The specific operation is the same as “6.1.1 OT &
Weekends Setting”.

• Rounding Setting

Click Rounding Setting tag to enter to the Rounding Setting interface:

Rounding Type: There are two types of rounding, namely, Regular and Custom.

-->When the Rounding Type is selected as Regular

» Regular

Check-In/Check-Out Round Value: The minimum round-off unit of punch time. If the Round Value = 10, then
takes 10 minutes as the minimum unit when counting the punch time.

Check-In/Check-Out Round Down: The rules of rounding down. When punch time is greater than or
equal to the cutoff value, it gets rounded up; otherwise, it gets rounded down and not counted in the
attendance time.

Assume that Check-In/Check-Out Round-Off Value = 10 minutes; Check-In/Check-Out Cutoff Value = 5
minutes.

ZKTime.Net 3.0 45