Page 43 - Buy Premium Tools ORION Catalogue
P. 43
Drilling tools
Stone drill/Core drill
Cemented carbide stone drill with straight shank DIN 8039
For use in stone, concrete and masonry
Metal cutting tools
Metal cutting tools
Z HA
VHM
2
Application: Advantage:
For drilling and hammer drilling in masonry, granite, Standard cemented carbide for a long service life
natural and artificial stone and sand-lime brick. Excellent price-performance ratio
Execution:
Soldered cemented carbide cutting insert with
straight shank, two cutters
Cutting edge Ø Shaft Ø (mm) Chip flute Length (mm) 11185... Cutting edge Ø Shaft Ø (mm) Chip flute Length (mm) 11185...
(mm) length (mm) ID no. (mm) length (mm) ID no.
3 3 40 70 030 O. R. 10 10 80 120 100 O. R.
4 4 40 75 040 O. R. 12 12 90 150 120 O. R.
5 5 50 85 050 O. R. 13 12.7 90 150 130 O. R.
5.5 5.5 50 85 055 O. R. 14 12.7 90 150 140 O. R.
6 6 60 100 060 O. R. 15 12.7 100 160 150 O. R.
6.5 6.5 60 100 065 O. R. 16 12.7 100 160 160 O. R.
7 7 60 100 070 O. R. 18 12.7 100 160 180 O. R.
8 8 80 120 080 O. R. 20 12.7 100 160 200 O. R.
9 9 80 120 090 O. R. Unit price, €
Prod. group 140
Cemented carbide stone drill set with straight shank DIN 8039
For use in stone, concrete and masonry
Z HA
VHM
2
Application: Advantage:
For drilling and hammer drilling in masonry, granite, Standard cemented carbide for a long service life
natural and artificial stone and sand-lime brick. Excellent price-performance ratio
Execution: Sturdy metal box safely protects the drill bits
Cemented carbide stone drill set with straight
shank, two cutters, in a metal box
Number of pieces in assortment/set (PCS) 7
Composition of set 1 bit for each drill diameter 4/5/
2 x 6/8/10/12 mm
Ident. No.
010
11186... Unit price, € O. R.
Prod. group 140
Sheet hole drill HSS
for universal use up to 1000 N/mm 2 DIN 344
HSS TiN
Application: Advantage:
For producing bores in thin sheets made from steel, Innovative cutting geometry: All bores are free of
non-ferrous metals and cast iron. Also suitable for all burr marks and chatter marks
plastics, for hard paper and plywood, as well as all User-friendly regrind: Drills can be reground
materials of similar structure and strength repeatedly No. 11400
Execution: No deformations even with the thinnest material
Profile ground to meet the highest requirements thicknesses
for dimensional accuracy and process reliability
No. 11401
Application Steel (N/mm ) Stainless steel Alu Brass Bronze Plas- Graphite GG(G) Titan- Nickel- Super- Hard mat.
2
No. <700 <1000 <1300 marten. austen. short long short long short long tics G(C)FK GjMW alloy alloy alloy <55 HRC <65 HRC
11400
11401
www.buypremiumtools.com 43
