Page 74 - GuardII+ Series 4208 Platform PD User Manual
P. 74
User Instructions
6.7. IAM Utilities
IAM provides a set of utilities for use with the GuardII+. These are accessed by selecting
the monitor, and then pressing the ‘Device Utilities’ button.
Figure 6-35 IAM Monitor Utilities
Pressing one of the Utility buttons will run that Utility.
Figure 6-36 IAM Monitor Utilities
6.7.1. Reboot Instrument
This utility will simply re-start the GuardII+. Once the utility is run, it will take a few minutes
before the monitor will start running measurements again.
66
www.irispower.com
