Page 242 - Microsoft Word - 2_Inch_Drain_Adapter_PDS_2016_01_05
P. 242

™
                                        VERSATERM  EDGE


            DESCRIPTION:
            The VersaTerm™ Edge system may be used as a
                                        ®
            perimeter flashing for Duro-Last  roofing systems.
            The system consists of a base and a snap-on metal
            cover.
             Base and cover is fabricated in 10’ lengths; 4” –
             13” widths
             Ready-to-assemble inside and outside corners.
             Not sensitive to mil thickness.

            ENERGY EFFICIENCY:
                                      ®
                  ®
             LEED  and ENERGY STAR  compliant.
            INSTALLATION:

            1.  A wood nailer is required if 1” or greater of
               insulation is used.
            2.  This nailer should be attached to the wall in
               accordance with ANSI/SPRI ES-1 3.9.
            3.  Install in accordance with Detail Drawing 3580.
            4.  Any deviation from the requirements set forth in
               detail drawings must be pre-approved, in writing,
               by the Duro-Last Engineering Services
               Department.

            CODES AND STANDARDS:

             ANSI/SPRI ES-1 Compliant with 4” – 13” base and
             cover

            WARRANTY:
                          ®
            EXCEPTIONAL  Metals offers a finish and substrate                          Base
            warranty. Contact Duro-Last for any additional            Material         Gauge           Finish
            warranty that may be offered.
                                                                     Aluminum           .050            N/A
            TECHNICAL SERVICES:                                    Galvalume Plus     22 gauge          N/A

            Product samples, detail sheets, color chips, and
            color chart are available for your submittal package.                     Cover*
            For assistance with questions or submittals, contact      Material         Gauge           Finish
            your local representative or call Duro-Last.
                                                                     Aluminum           .040         Mill or Kynar

                                                                    Stainless Steel   24 gauge          N/A
                                                                   Bonderized Steel   24 gauge          N/A
                                                                     Galvalume        24 gauge       Mill or Kynar
                                                                  * 9” – 13” widths available in .040 aluminum only




              www.duro-last.com                            1 of 1                                 800-248-0280
             Duro-Last, EXCEPTIONAL and “World’s Best Roof” are registered trademarks owned by Duro-Last, Inc. Galvalume is a registered trademark owned by BIEC International Inc. LEED is a
                                             ®
           registered trademark owned by the U.S. Green Building Council  and is used with permission. ENERGY STAR is a registered trademark owned by the U.S. Government. ENERGY STAR is only
                       valid in the United States. Kynar is a registered trademark owned by the Arkema Group.                            Created: 01/28/2017 Revised: 02/03/2017
   237   238   239   240   241   242   243   244   245   246   247