Page 244 - Microsoft Word - 2_Inch_Drain_Adapter_PDS_2016_01_05

Vinyl-Coated Drip Edge

Description:
The Vinyl-Coated Drip Edge provides maximum water
flow from roof decks while providing an architectural,
visually-attractive termination.
 Fabricated from vinyl-coated metal with a 6”
attached PVC membrane skirt in 10’ lengths; 2”–
8” widths.

 Profiles can be custom-fabricated to meet most
specifications.
 Can be fabricated to accommodate various roof
pitches and mansards with a maximum face size
of 8”.

 Available in white, tan, gray, or dark gray and
can be painted with latex or acrylic paint to
match building design.

Energy Efficiency:

®
®
LEED and ENERGY STAR compliant.

Installation:

1. A wood nailer is required if 1” or greater of
insulation is used.

2. This nailer should be attached to the wall in
accordance with ANSI/SPRI ES-1 3.9.

®
3. Install in accordance with EXCEPTIONAL
Metals Detail #3120.

4. Any deviation from the requirements set forth in
detail drawings must be pre-approved, in writing,
by the EXCEPTIONAL Metals Technical
Department.

Warranty:

EXCEPTIONAL Metals offers a finish and substrate
warranty. Contact the membrane manufacturer for any
additional warranty that may be offered.

Technical Services: Material ® Gauge Finish
Galvalume 24-gauge PVC
Product samples, detail sheets, color chips, and color Stainless Steel 24-gauge PVC
chart are available for your submittal package. For Aluminum .040 PVC
assistance with questions or submittals, contact your
local representative or call EXCEPTIONAL Metals.

®
“Duro-Last” and “EXCEPTIONAL” are registered marks owned by Duro-Last Roofing, Inc. “LEED” is a trademark owned by the U.S. Green Building Council and is used with
permission. “ENERGY STAR” is a registered mark owned by the U.S. Government. ENERGY STAR is only valid in the United States. “Galvalume” is a registered mark owned by
BIEC International Inc. Revised 11/04/2015