Page 1157 - 2006 HARLEY FLSTCI SERVICE MANUAL
P. 1157

Figure 9-45. End Cap Removal  1   2            Figure 9-46. Top Plate Connector


















               8399                                     11562                          Connector [86]  1.  Tab  2.



                                                            While pushing tab (2) in direction

              Fuel Level Sending Unit Wire Harness







                      CAUTION Do not replace the special teflon coated fuel pump/fuel level sender wiring with ordinary bulk wire. Ordinary insulation materials may deteriorate when in contact with  NOTE Damaged fuel pump and/or fuel level sender wiring requires replacement of the fuel level sender unit. Remove fuel pump/fuel gauge sending unit from fuel tank. See  REMOVAL in this section.  Disconnect fuel pump connector.  shown, pull top plate connector (1) from top plate. Discard fuel level sending unit and wiring harness. Obtain new fuel level sending unit and wiring harness. Install fuel level sending unit. See  INSTALLATION in this  Connect top plate connector













          HOME                  gasoline.       1.     2.   Figure 9-46.   See   3.  4.  5.  6.  section.  7.  8.  9.  this section.                             9-30
   1152   1153   1154   1155   1156   1157   1158   1159   1160   1161   1162