Page 1185 - 2006 HARLEY FLSTCI SERVICE MANUAL

1WARNING 1WARNING Whenever a wheel is installed and before moving the motorcycle, pump brakes to build brake system pres- sure. Insufficient pressure can adversely affect brake performance, which could result in death or serious Pump brake pedal to move pistons out until they contact both brake pads. Verify piston location against pads. Check belt deflection. See REAR BELT DEFLECTION in Install right (24) and left axle covers (5). Tighten to 20-30 in-lbs (2.3-3.3 Nm). See 2.15 REAR AXLE COVERS. Install mufflers. See EXHAUST SYSTEM: FXSTD/ FLSTF in the Softail Models Service Manual.

the Softail Models Service Manual.
injury. (00284a)

12. 13. 14. 15.

See Figure 2-4. Identify the orientation of the right (17)
and left (10) spacers and right (18) and left (9) axle

NOTES The left spacer is thicker than the right spacer. The left axle cover bracket is labeled L (left) and is deeper than the right axle cover bracket which is labeled Position right and left spacers (10, 17) onto hub and hold Roll wheel into rear fork and position brake disc side Coat axle (19) with LOCTITE ANTI-SEIZE LUBRICANT Carefully slide axle (19) through adjuster collar (8), right side cover bracket (18), right rear fork, rear cal- iper bracket, right side spacer (17) and rear wheel Continue sliding axle (19) through left side spacer 1WARNING 1WARNING Do not exceed 65 ft-lbs (88 Nm) when tightening the axle nut. Exceeding 65

INSTALLATION cover brackets. R (right). in position. spacer between wheel and fork. Pull drive belt over drive sprocket. and install. (25). (10) and left rear fork. result in death or serious injury. Install spring clip (4). vice Manual. Install rear caliper. 2006 FLSTFSE 2 : Chassis

HOME 1. ● ● 2. 3. 4. 5. a. b. 6. 7. 8. 9. 10. 11. 2-10