Page 1183 - 2006 HARLEY FLSTCI SERVICE MANUAL
P. 1183

If necessary, remove drive sprocket fasteners (2), wash-
                           If necessary, remove brake disc fasteners (27) and brake
              2.6                     in the
                                      WHEEL BEARINGS  Inspect wheel bearing end play and service bearings if  If removed, install wheel bearings (14). See SEALED WHEEL BEARINGS in the Softail Service Manual. If removed, install drive sprocket (26). See DRIVE- SPROCKET INSTALLATION in the Softail Service Man- If removed, install brake disc (16). See BRAKE DISC Verify that wheel and tire are true. See DISC RIM RUNOUT and TIRES in the Softail Models Service Man-












                      DISASSEMBLY  1.  disc (16).  2. ers and drive sprocket (26).  3. necessary. See SEALED  Softail Service Manual. Inspect all parts for wear or damage.  4.  ASSEMBLY  1.  2.  ual.  3. INSTALLATION in the Softail Service Manual.  4.  ual.

















                           Block motorcycle under frame so weight of motorcycle is Inspect drive belt for wear conditions and drive sprocket for tooth damage or loss of chrome. See REAR BELT AND SPROCKETS in the Softail Models Service Man- Inspect brake disc and pads for wear. Measure brake disc thickness. See BRAKE PADS AND DISCS in the Rotate the wheel several times to check for rough or Remove top and bottom mufflers. See EXHAUST SYS- TEM: FXSTD/FLSTF in the Softail Models Service Man- See Figure 2-4. Remove right and left rear axle covers Remove belt guard and debris deflector from rear fork. See BELT GUARD/DEBRIS DEFLECTOR in Softail Remove rear brake caliper.








              REAR WHEEL      off rear wheel.  Softail Models Service Manual.  uneven bearing rotation.   (5, 24). See 2.15 REAR AXLE COVERS.  Models Service Manual.  vice Manual.  and orientation (flat end toward wheel).  Thicker wheel spacer fits left side of motorcycle.  adjustment collar (8) and cover bracket (9). Loosen jam nuts and retract axle adjusters (20).   cycle as the axle is removed.  (19) is removed.  Reseating the piston requires disassembly of the caliper.  Capture right and left side spacers (10, 17).  2006 FLSTFSE 2 : Chassis








          HOME        REMOVAL  1.  2.  ual.  3.   4.    5.  ual.  6.  7.     8.     9.            10.  11.               12.                13.  14.  15.  2-8
   1178   1179   1180   1181   1182   1183   1184   1185   1186   1187   1188