Page 250 - 2006 HARLEY FLSTCI SERVICE MANUAL

5-31

NO With meter still connected, check for resistance. Is resistance 600-1200 ohms? NO Replace crank position sensor. See Softail Service Manual. 2006 Softail: Engine Management (EFI)

Connect DVOM to Terminals Clear codes using speedometer self diagnostics. SPEEDOMETER SELF DIAGNOSTICS. Confirm proper operation with no check engine

NO 1 and 2 of [79A]. Crank engine. Does DVOM read 1 VAC minimum? YES Loose sensor at crankcase. Check for contamination or damage. Tighten sensor.

Disconnect CKP connector 8 5.6 See lamp.

NO [79]. Check connectors for moisture and corrosion. Check wires for chafing. Is connector or wire damage present?

YES Replace CKP sensor. NO Locate and repair open on R wire between Terminal 1 of connector [79B] and cavity 30 on Breakout Box.
Continued from Test 5.10 (Part 3 of 4). Check connectors for moisture and corro- sion. Check CKP sensor and harness wires for chafing. Connect DVOM to ECM cavities 12 and 30 on Breakout Box and set it for AC volts. Crank engine. Does DVOM read 1 VAC minimum? YES Replace ECM. Reprogram and learn password.

Test 5.10 (Part 4 of 4) ENGINE CRANKS, BUT WILL NOT START YES Check for continuity between cavity 30 on Breakout Box and terminal 1 of connector [79B]. Continuity present? YES Locate and repair open on BK wire between Terminal 2 of connector [79B] and cavity 12 on Breakout Box.

HOME