Page 613 - 2006 HARLEY FLSTCI SERVICE MANUAL

1.12 s0549x1x

2
Figure 1-28. Clutch Cable Adjuster Figure 1-29. Clutch Adjuster Screw 3 Figure 1-30. Clutch Hand Lever
3 1/16-1/8 in. (1.6-3.2 mm)

4 1

2

Rubber boot Cable adjuster Jam nut Cable end Locknut Clutch cable Cable ferrule
1 Clutch adjuster screw 2 Clutch lever bracket

f1440x6x 1. 2. 3. 4. 1. 2. d0382x1x 1 1. 2. 3.

TORX screws with captive washers to (8.1-13.6 Nm), in-lbs

CAUTION Perform the clutch adjustment with the motorcycle at room temperature. The clearance at the adjuster screw will increase as the powertrain temperature increases. If adjuster screw is adjusted with power train hot, clear- ance at push rod bearing could be insufficient with power train cold and clutch slippage could occur. Stand motorcycle upright and level. Point front wheel detach clutch inspection cover from primary chaincase See Figure 1-28. Add free play to cable. Slide rubber boot (1) off cable adjuster. Holding cable adjuster (2) with 1/2 in. wrench, loosen jam nut (3) using a 9/16 in. wrench. Turn cable adjuster (2)

CLUTCH ADJUSTMENT straight ahead. Remove five cover. Remove and discard gasket. turn. Check free play.

HOME 1. 2. 3. 4. a. b. c. 5. 6. 7. 8. a. b. 9. 1-28