Page 675 - 2006 HARLEY FLSTCI SERVICE MANUAL
P. 675

below. Angle the spoke counterclockwise crossing four
                  lower row spokes. The spoke must enter the hole to the
              Place the first upper row spoke into the hub as shown








                                                           Figure 2-26.  Install the remaining nine upper row spokes into every fourth remaining hole above the rim centerline.  Figure 2-27.


                    left of the valve stem hole.












              5.         d0461x2x                           6.     d0462x2x

                   Place the hub on table with brake disc side (narrow
                               Narrow flange



                        as shown below. Angle spokes clockwise. flange) up. Insert a spoke in each hole of the lower row  Figure 2-23.  Center the rim over the hub assembly with the valve Using any lower row spoke, place the first spoke into the rim hole to the left of the valve stem hole on the upper  Figure 2-24.  Install the rest of lower row spokes in every fourth hole.  Figure 2-25.   2006 Softail: Chassis










              PROCEDURE                                                stem hole facing upward.  half of the rim centerline.






          HOME     1.        d0456x2x                               2.    3.       d0457x2x                            4.   d0458x2x                             2-26
   670   671   672   673   674   675   676   677   678   679   680