Page 671 - 2006 HARLEY FLSTCI SERVICE MANUAL

ALIGN-

11WARNING 1WARNING Check wheel bearing end play after tightening axle nut to specified torque. Excessive end play can adversely affect stability and handling. Insufficient end play can cause bearing seizure. Either condition can cause loss of con- trol, which could result in death or serious injury. See Figure 2-13. Install collar (4), washer (3) and axle Tighten axle nut to 60-65 ft-lbs (81.3-88.1 Nm). Check to see if the spring clip (1) can be installed. If required, tighten axle nut to no more than 65 ft-lbs (88.1 Nm) and align axle hole and nut slots. Install Install brake pads. See 1.8 BRAKE PADS AND DISCS 11WARNING 1WARNING Whenever a wheel i

nut (2) on left side of axle. spring clip. Install debris deflector. DEFLECTION).

(00285a) 4. a. b. 5. 6. injury. (00284a) 7. 8.

2.9 SEALED 1.8 BRAKE PADS LACED 2.12 TRUING

CLEANING AND INSPECTION
wheel bearings must be serviced, see Inspect all parts for damage or excessive wear. If sealed WHEEL BEARINGS 11WARNING 1WARNING Always replace brake pads in complete sets for correct and safe brake operation. Improper brake operation could result in death or serious injury. (00111a) Inspect brake rotor and pads. See Inspect rear belt and sprocket. See 1.15 REAR BELT See Figure 2-15. If hub and rim (8) were disassembled, see 2.10 WHEEL LACING: 16 IN. RIM. Verify that wheel and tire are true. For laced wheels, see For disc wheels, see 2.13 DISC RIM RUNOUT. Install brake disc (4) on valve stem side of wheel if Apply a drop of LOCTITE THR

HOME 1. 2. AND DISCS. 3. AND SPROCKETS. ASSEMBLY 1. 2. a. WHEEL. b. 3. removed. a. b. 4. a. b. INSTALLATION 1. 2. 3. install. a. brake disc. b. 2-22