Page 673 - 2006 HARLEY FLSTCI SERVICE MANUAL

PART NO.
Figure 2-18. Installation Tool Support Plate
6 HD-44060-5 HD-44060-4 RS25100-200 J-23444A HD-44060-3 HD-44060-7 HD-44060-8 HD-44060-6 HD-44060-1
Figure 2-19. Installing Bearing DESCRIPTION Collet, 1.0 in. (FLT front axle only)
3 12547 10210 12004 280856

5 2
4
1

Threaded rod Washer Nice bearing Wheel bearing Steel ball Forcing screw Nice bearing Lubricant Collet, 3/4 in. Pilot, 1.0 in. (FLT front axle only) Pilot, 3/4 in. Support plate Threaded rod

d0561x2x d0562x2x Nut Pilot Bridge Nut Washer
4.
5.
6.
3.
1.
2.
NO. 1 2 3 12 4 5 6 7 8 9 13 10 11 12 13 Figure 2-20. Wheel Bearing Remover/Installer (Part No. HD-44060)

SPECIALTY TOOL Wheel bearing installer/remover NOTE Obtain WHEEL BEARING INSTALLER/REMOVER (Part Sparingly apply graphite lubricant to threads of threaded rod to prolong service life and ensure See Figure 2-18. Place threaded rod through sup- port plate. Insert assembly through wheel. Figure 2-19. Place the new bearing (6) on rod Install pilot (5), Nice bearing (4), washer (3) and nut Hold hex end of threaded rod (1) and turn nut (2) to install bearing (6). Bearing will be fully seated when nut Reverse tool and install opposite side bearing. On FLSTF disc front wheels, install hub plate opposite WHEEL: ALL BUT 2.4 FRONT 9 10 11 5

INSTALLATION PART NO. Always install first bearing on brake disc side. No. HD-44060) and assemble. smooth operation. See (1) with lettered side outward. (2) over rod. can no longer be turned. Remove tool. Install spacer sleeve inside wheel hub. front brake disc. See FLSTSC/FXSTS/FXSTD. 8 7 6 4 2006 Softail: Chassis

HOME HD-44060 1. a. b. c. d. 2. 3. 4. 5. d0563x2x 1 2 3 2-24