Page 681 - 2006 HARLEY FLSTCI SERVICE MANUAL

42.291-42.800 37.211-37.719 32.309-32.817 28.753-29.261 35.357-35.864 43.053-43.561 36.830-37.338 25.146-25.654 28.194-28.702
Table 2-8. Wheel Offset Dimensions
MM

IN. 1.665-1.685 1.465-1.485 1.272-1.292 1.132-1.152 1.392-1.412 1.695-1.715 1.450-1.470 0.990-1.010 1.110-1.130

WHEEL STEEL LACED RIM Front Front Front Front Rear CHROME ALUMINUM PROFILE LACED RIM Front Front Front Rear

MODEL FXST, FXSTD, FXSTB FXSTS FLSTC, FLSTN FLSTSC FLST FLSTC, FLSTN, FLSTSC, FLST FXST, FXSTB FXSTS FLSTC, FLSTF , FLSTSC, FLSTN, FLST FLSTC, FLSTF , FLSTSC, FLSTN, FLST

the two
If the dimension is not correct, tighten the four spokes
80). For example, if the measurement on the right rim
accordingly. Use SPOKE WRENCH (Part No. HD-94681-
loosen

than it should be, spokes attached to the hub right side and tighten the two spokes attached to the hub left side. Turn all four spokes an equal number of turns until offset dimension is NOTE Always loosen the appropriate spokes before tightening the other two. Reversing this procedure will cause the rim to Repeat the previous step for all four groups on the wheel. NOTE FXST, FXSTB, FXSTS models are not equipped with laced

less 2006 Softail: Chassis
edge side is correct. become out-of-round.

HOME 5. 6. rear wheels. 2-32